6ft 60W Twin LED Batten Light 1800mm 6000K for Workshop

6ft 60W Twin LED Batten Light 1800mm 6000K for Workshop

● Double security structure with screw

● Conduit entry points at both ends

● Suitable for BESA mounting

● OEM/ODM custom service available

● Multiple variations available

● High lumen efficiency, up to 150lm/W

● MOQ:1000

● 3/5 years warranty optional

WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message

6FT Twin Led Batten 6000k Details

4691780471484943.jpg


Workshop ceilings are high, and the work below is detailed. That combination is what the twin-tube format exists to solve: two LED strips inside a single 1800mm housing deliver roughly double the output of a single-tube batten, so fixtures can be spaced further apart and mounted higher up without losing light where it counts — on the bench, the machine bed, and the inspection table. The 60W led batten light engine runs cool behind a wide diffuser that spreads light laterally as well as downwards, softening the hard-edged shadows that make calipers, thread gauges, and surface finishes difficult to judge. 6000K daylight keeps colour and contamination visible under close scrutiny, and the rigid steel-reinforced body tolerates the vibration of presses, compressors, and overhead cranes without loosening its diffuser or flickering its driver.


Feature

● lock-in-place clip design
● Detachable, loop-in/loop-out 4pin terminalblock with emergency provision
● Three rear conduit entry points with BESA guides

未标题-2_01舒服点.jpg

Options

Microwave Sensor / Emergency / 1-10Vdim / DALl / 3CCT / WIFI / Bluetooth / Power select / Linkable

未标题-2_01.jpg


Key Features & Advantages Of 6FT Twin Led Batten 6000k

01

Twin-Tube Output for High Mounting Heights

6ft twin led batten light 6000ks in one housing roughly double the lumens per fixture, which means fewer units at greater mounting height — ideal for workshops with 5 m plus ceilings where single-tube battens leave the bench in shadow.

02

1800mm Span Cuts Fixture Count Again

At six feet long, each fitting covers more linear ceiling than any 4ft alternative. Longer runs, fewer joints, fewer suspension points, and a visibly tidier ceiling line across a large machine hall.

03

6000K Inspection-Grade White

Daylight colour temperature exposes surface defects, oxidation, and fluid seepage that warm light flattens out. Inspectors see what they are looking at, and operators can match paint and material samples against the work in hand..

04

Sealed Against Metal Dust and Swarf

Fine conductive dust is the quiet killer of workshop lighting. The enclosed diffuser and gasketed end caps keep ferrous particles away from the driver and LED board, extending service life in machining and grinding environments.

05

Rigid Body, Vibration-Tolerant

Steel-reinforced construction and locking clips hold the diffuser firmly in place under press and crane vibration, so the 6ft twin led batten light 6000k stays sealed and rattle-free shift after shift.

06

Direct Upgrade From Twin Fluorescent Battens

Mounting centres, feed positions, and overall footprint align with legacy twin 5ft/6ft fluorescent fittings, making changeover a like-for-like swap rather than a redesign — often within a single maintenance window.



6FT Twin Led Batten 6000k Details

BESA backplate mounting holes of 6ft twin led batten 6000k with rear cable entries

BESA backplate design

Top view of 1800mm led batten light showing internal LED strips and driver layout

BESA backplate design

Tool-free clip-off diffuser cover design of 60w led batten light 6000k

BESA backplate design



Specification

ItemVoltagePowerLumenIPIKPFRaSize
PK-WP-B-206220-240V18W2340 lm65 08 0.9 >80600*102*76mm
PK-WP-B-212220-240V36W4680lm65 08 0.9 >801200*102*76mm
PK-WP-B-215220-240V50W6500lm65 08 0.9 >801500*102*76mm
PK-WP-B-218220-240V70W9100lm65 08 0.9 >801800*102*76mm

Application Scenarios OF 6FT Twin Led Batten 6000k

Corridors, Stairwells & Public Passages
Corridors, Stairwells & Public Passages

Industrial corridors linking workshops run long and narrow. Spaced at generous intervals, 1800mm led batten lights cover more corridor per fixture, keeping walkways uniformly lit with far fewer installation points along the run.
ScreenShot_2026-11-06_085348_605 (1).png
Retail Display Shelving
Retail Stores, Supermarkets & Showrooms

Trade showrooms displaying machinery, tools, or building materials need high output to reveal product detail across large floor plates. The twin-tube format lights deep display areas evenly, and the daylight tone keeps material samples — timber, stone, metal — true to colour.
708 (1).png
Factory Workshops & Production Lines
Factory Workshops & Production Lines

This is the led workshop batten lights's natural habitat. Mounted along the line at height, twin-tube output reaches the bench with enough intensity for assembly, measurement, and inspection, while 6000K light keeps component colours and defect marks unambiguous under close examination.
92 (1).png
Offices, Meeting Rooms & Back-of-House Areas
Offices, Meeting Rooms & Back-of-House Areas

Workshop supervision offices and production planning rooms often overlook the shop floor through glazed partitions. High-output led workshop batten lights maintain balanced brightness between the office interior and the brighter hall beyond, avoiding the glare-and-silhouette effect that plagues poorly lit control rooms.
6.jpg
Warehouses & Logistics Sorting Centers
Warehouses & Logistics Sorting Centers

High-bay storage areas with 8–10 m racking benefit from the twin format's reach: fewer fixtures, mounted higher, still delivering usable light at the lowest pick level. In sorting halls, the wide spread keeps conveyor belts and chute mouths evenly lit for both staff and camera systems.
7.jpg
Libraries
Libraries

Engineering libraries and standards archives store large-format drawings and technical manuals. Twin-tube output delivers the higher illuminance these documents require, and the wide diffuser keeps light even across drafting tables where fine linework must be read for hours.
8.jpg
Parking Garages
Underground Parking Garages & Parking Areas

Deep parking levels with high soffits need broad, penetrating light rather than a decorative wash. The twin-tube 1800mm format throws a wide, powerful pool of daylight-white light down each bay, so number plates, pedestrian routes, and column references are all readable from a moving vehicle.
ScreenShot_2026-11-06_092936_341 (2).png
Schools, Hospitals & Public Buildings
Schools, Hospitals & Public Buildings

Technical colleges, hospital engineering wings, and municipal workshops all house equipment that demands proper task lighting. The 1800mm 60w led batten light 6000k delivers workshop-grade illuminance while meeting the colour-consistency expectations of public-sector facility standards.



Factory Advantages

compressed_矩形 8备份 8.jpg

Production & Supply Chain Excellence

Operating an ISO-certified modern manufacturing facility spanning over 15,000 m² with automated SMT production lines and modern assembly workshops.

Fully certified under global standards including CE, RoHS, ERP, and SAA, guaranteeing compliance across international markets.

compressed_矩形 8备份 9.jpg

Uncompromised Quality Assurance

Rigorous Testing: Every 60w led batten light 6000k product undergoes a 100% 72 -hour continuous high-voltage aging test and strict IP65 waterproof pressure spray testing prior to packaging.

Warranty Commitment: Backed by an official 3 to 5-year hassle-free warranty for total peace of mind.

compressed_矩形 8备份 10.jpg

Customization & Delivery Capabilities

High Capacity: Boasts an annual production capacity exceeding 1.2 million units of commercial and industrial fixtures.

Fast Lead Times: Flexible OEM/ODM support with custom sample production within 7 days and bulk container order fulfillment within 35 days.

compressed_矩形 8备份 11.jpg

Dedicated After-Sales Service

24/7 global customer support team providing technical assistance, installation guidance, and rapid replacement component shipping within warranty periods.



Certification

Intertek Certificate of Conformity for affordable LED Tri Proof light products
VDE Test Report for P-KING affordable LED Tri Proof light by Intertek
TUV Rheinland UK CA Certificate of Conformity Electrical Equipment Safety Regulations 2016 for P-KING affordable LED Tri Proof light
TUV Rheinland IECEE CB Test Certificate for P-KING affordable LED Tri Proof light
DEKRA TUV Rheinland Zertifikat Certificate for P-KING LED commercial LED Tri Proof light

Frequently Asked Questions

Q : What is the MOQ for the 60w led batten light 6000k, and can it be mixed with other wattages in one order?
Standard MOQ is 1,000 pcs per model. The 60w led batten light can be loaded together with other lengths and wattages once the combined order fills a 20GP container, which lets distributors and project contractors build a mixed first shipment instead of tying up budget in a single SKU. Samples are available before bulk production.
Q : As a 6ft twin led batten manufacturer, what OEM customization can you provide?
As a 6ft twin led batten manufacturer running our own SMT and assembly lines, we offer logo printing, custom carton and label design, driver brand selection, suspension kit options, and sensor or emergency configurations. A customized sample of the 6ft twin led batten 6000k is typically ready within 7 days, with artwork sign-off before mass production.
Q : Why choose an 1800mm led batten light instead of two shorter fixtures?
An 1800mm led batten light covers more ceiling per unit, so a machine hall needs fewer fittings, fewer suspension points, and fewer wiring joints — which also means fewer failure points. The twin-tube format doubles the output per fixture, allowing wider spacing at higher mounting heights while keeping the bench and machine bed evenly lit.
Q : Are these led workshop batten lights suitable for dusty, vibrating production environments?
Yes. These led workshop batten lights use an enclosed diffuser with gasketed end caps that keeps metal dust and swarf away from the driver and LED boards, and the steel-reinforced body with locking clips holds firm under press and crane vibration. Every batch passes 100% aging testing before packing, backed by CE, RoHS, ERP, and SAA certification.
Q : Is the 6000k output of the 6ft twin led batten consistent across repeat orders?
The 6ft twin led batten 6000k is produced with single-bin LEDs controlled within a 3-step MacAdam ellipse, so repeat shipments match the sample you approved. For private-label or tender programs we can lock a specific bin to your account and record it in the specification sheet, keeping inspection-grade daylight color stable batch after batch.

Please Contact Us!

*How would you describe your business?
Company Name
*
This field is required
Email
*
This field is required
Email format error
Phone
This field is required
Telephone information is wrong!
Message
*
This field is required
Send Message